For testing Shimano e-bike batteries. The adapter ensures that the battery remains active and can be tested. For Shimano BT-E6000, BT-E6001 and BT-E6010 batteries.

Shimano Steps e-bike batteries are used in the following e-bike brands: BMC, Cortina, Focus, Gazelle, Kalkhoff, Merida, Scott, Sparta, Cannondale, dutch id, HPvelotechnik, Koga, Oxford, Pegasus, WMS, Bergamont, brinke, Drossiger, KTM, Puch, Venturelli, Achielle, Alba, Azorbike, bakfiets.nl, Beaufort, Flanders, Frappé, Olympia, Popal.

An adapter cable AT00038 is needed! This is included into the delivery of a Batterytester. The adapter cable can be ordered separately as well.

Instruction:
1. Connect the adapter with the adapter cable AT00038 to the batterytester.
2. Slide the adapter into the battery.
3. Press the button on the battery to switch it on.
4. Start the battery tester and follow the instructions.
Note: The USB connection on the adapter is intended for a possible firmware update of the adapter. DO NOT connect this! Incorrect use may result in damage!
Do not test the battery several times in a row, but always connect the battery to the bike again!